answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: How do you remove the steering column to get to the ignition of a 1994 Buick Roadmaster?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you remove the ignition key switch on a 94 probe?

Disconnect the negative battery cable. Remove steering column covers Disconnect the electrical connector from the ignition switch Remove the screw retaining the switch to the steering column


How do you remove the ignition switch tumbler on a 1986 dodge lancer 2.5?

Remove the screws on the side of the steering column. Remove the screws underneath the steering column and pull the bottom half of the column down. Slide a pin punch into the hole at the ignition tumbler assembly's bottom. Force the tumbler upwards and pull it out of the steering column.


How do you remove the steering column bearings on a 1994 ford F350?

remove column dust covers, along with ignition switch. then remove retaining


How do you remove ignition barrel from bf xr8?

how to remove key barrel from a XR8 steering column


What is a interlock relay and what does it corvette74 and how can you remove your ignition from your steering column?

the hole steering colom needs to be replaced


How to replace the ignition switch?

remove the steering wheel. unbolt the collar that holds the steering column underneath the dash. that plastic box halfway down the column with all of those wires hanging out of it is your ignition.


Where is ignition switch on 1993 Honda civic located?

it's located inside the steering column. Remove 3 screws on the lower steering column cover. Its the white plastic on the oposite side of the ignition.


Remove steering column 1995 ford van?

Disconnect battery. Wait 10 minutes, then remove airbag module (if equipped) and horn pad. Remove steering wheel. Pull off plastic trim panel below steering column. Turn ignition key to run (not start) and press lock tang to remove lock cylinder. Remove steering column lower shroud. Remove steering column upper shroud. Remove multi-function (turn signal/wiper/hazard) switch. Remove metal 'knee brace' bracket below steering column. Disconnect all affected wiring including wiring to ignition switch. Remove pinch bolt at bottom of steering column. Remove 2 nuts and t bolts mounting steering column. Note that it will now drop down and may pinch fingers or toes. Remove column from vehicle.


How do you remove the Ignition switch assembly on a 1993 Acura Legend?

you have to replace the whole steering column


How do you remove the steering lock on a 1994 Ford Probe?

# Disable airbag system. # Remove steering column covers and lower instrument panel cover # Lower steering column # Disconnect the shift interlock cable from ignition lock housing # The lock assembly is clamped to the steering column by two shear-head bolts. Drill heads off each bolt and remove the bracket. # Remove the steering lock assembly from the steering column


How do you remove key switch Ford F-350?

Disconnect the negative battery cable, using a socket. Remove the lower steering column shroud, using screwdriver. Lower the steering column by removing the three 15 mm nuts in the column support bracket on the instrument panel, using a socket. Pull the electrical plug out of the ignition switch. Remove the two bolts securing the ignition switch to the steering column, using the appropriate socket. Lift the ignition switch off the column. Hope this helps.


How do you remove a ignition switch from a 1998 astro van?

One to repair an ignition switch on your Astro Van is buy a replacement steering column from a local salvage yard including the ignition key, and replace the whole steering column. RC Houston, TX