you must remove the dash panel that goes over the stereo, heater and around the gauges then all you have to do is pull it out just by pressing two tabs on each side of the stereo
it depends if u are using the stock stereo then no but if it is not a stock stereo then u may have an aux input jack which comes out the back of the stereo the easiest way is to just pull out the stereo and take a look
Use straight small screwdriver to pop up small plastic inserts on each side of radio then allen wrench remove screws. walla
First and formost, what engine? i4 for a v6?
Oldsmobile didn't make a Cutlass Supreme in 1998
You have to have a special key. I had a 1998 M3 a dealer will remove it. They did charge
How do you install a radiator in a 1998 ford contour?"
Hi Try this http://www.carstereohelp.com/stereoremovalHyundaiExcel.htm
The keys on the 1998 Ford Contour are NOT chipped
where is egr valve on 1998 ford contour
pull the cover plate off by hand,then remove the bolts then the radio will pull right out.
Motorcraft BXT - 40R - for the 2.0 L 4 cylinder and the 2.5 L - V6
DIN removal tool, found at any auto parts store.
Hey Max==If your ford dealer doesn't have it in stock, he ought to be able to order it for you. GoodluckJoe
The battery is the main power supply of the 1998 Ford contour.
find it then remove it from its socket and then put anew one in its place.
the dash just removes without having to untighten any screws
yes it will fit
I have a 1998 Ford Contour with 6 cylinders 2.5L and they are 32 mm.
5W-30 ( according to the 1998 Ford Contour Owner Guide )
loosen the serpretine belt tension and remove the two bolt that hold the alternator
Yes, it shouldn't be a problem.
lift up the powersteering reservior, then with a 10mm socket unscrew the bolt holding the computer harness
Use a chain wrench around the pulley and a breaker bar on the bolt.
Usually located behind the driver's door panel. Remove inside door panel for access