answersLogoWhite

0


Best Answer

You need an impact driver wrench. But be careful, the heads of the screws strip easily.

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you remove the stuborn Philips head screws on fron disk break rotors on a 1999 Honda CR-V?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you replace front rotors on a 2008 Honda accord?

pull off the front wheels. remove the calipers. remove the two screws that hold on the rotors. replace the rotors and reverse the procedure.


How do you remove the Philips screws on side door swing-out glass?

with a Phillips screwdriver


How to remove the 2004 civic door panels?

in the door opener there is a cover, remove it to access the 2 Philips screws, then unclip the cover of the door andle to access the 2 Philips screws. grab the panel by the botom then unclip it


How do you get the rotors off of a 1998 Camry?

On most camries you need to remove the wheels, then brake pads, and the calipers. Most camries do not use any screws to hold the rotors, thus when you remove the calipers you should be able to remove rotors without problems.


How do you replace dash bulb 1993 Honda civic lx?

Pull the hazard light button pocket, and remove the philips screw behind it. Remove the two philips screws on the under side of the dash, immediately above the dash instrument panel, and pull the trim panel out. Remove the four philips screws securing the dash instrument panel, and pull the panel out.


How do you change the back rotors on a 2002 Hyundai Sonata?

Same way as the front. First remove the calipers, then remove the two cross-point screws that hold the caliper in place . finally, remove the rotors and replace.


How do you remove the rotors on a 2004 Mitsubishi Endeavor?

i have 2006 endeavor changing brakes do i have to remove the two screws in the rotor to remove so i can have resurfaced


How to change the rotors on a 1991 Honda Civic?

To change the brake rotors on a 1991 Honda Civic raise the vehicle. Remove the wheels and brake caliper bracket. Remove the brake pads. Loosen the rotor mounting screws and replace the rotors.


How do you change the rotors on a 2004 Kia Sedona?

Remove the brake calipers first. Then there are two small philipsa screws in the rotors remove them and the rotors come off then. Just reverse the procedure to replace. Rotor costs aprox $54.00 wholesale each. if you are just changing the rotors you can remove the caliper and mouning bracket as one


How do you remove the front disc brake rotors from a '96 Ford Aspire?

Remove the hubcaps and wheels. Remove the two large bolts that hold the brake caliper to the steering knuckle. pull the caliper out of the way. There are two large Philips head screws that hold the rotor to the hub. Remove them and slide the rotor off the hub. Just did this to my '96. Hope it helps


How do you remove the front brake rotors on a 91 mpv v-6?

The rotors may be held in place by a couple of Phillips head screws. They may require some WD-40 and an impact wrench to remove them. If that fails, drill a 1/4" hole into the screw head, and it will fall off. After you remove the rotor, you can remove the stub with a pliers. The replacement rotors did not even have the screw holes. Dealer said that the screws were unnecessary...


How do you remove a radio from a 2006 Mitsubishi outlander?

remove heater bezzel (remove knobs and remove two Philips screws.) just pull out, do not remove. then unclip and remove stereo bezzel.