I believe it is a 12 point metric socket Not sure of the size though.
Turn counterclockwise to remove them.
14mm
Hey Candace==Remove the negative battery cable. Then remove the wires from the starter then the mounting bolts and work it out. GoodluckJoe
Remove the wiring harness from the back of the headlight. Remove the headlight assembly bolts. The headlight assembly will come out.
Look inside the trunk under the light for bolts to remove the light.
use an Allen wrench not a socket or open or box wrench.
Open the hood to the engine compartment. Remove the headlight wiring harness. Remove the headlight assembly bolts. There are four headlight assembly bolts. The headlight assembly will come out.
just remove the 3 bolts on top of the valve cover and lift it out,and theres the gasket.
* Detach the negative battery cable * Clearly label then disconect the wires from the terminals on the starter motor and solenoid * Remove the mounting bolts and detach the starter
Remove the negative battery terminal from the battery first, then remove the wires from the back of the starter. Now remove the two bolts holding the starter in and remove the starter. Reverse these steps for installation.
Yes, replace the head bolts.
Remove wheels Remove caliper mounting bolts Slide caliper off rotor Slide rotor off hub (if "peel off" type)