Want this question answered?
under the cowl, remove wiper arm assembly, remove cowl, remove windshield washer resvior (sp) and you will find it
Take the screws out CAREFULLY as well as the blade and swap them.
Remove the complete wiper assembly from the bottom of the windshield. This will give you room to remove the alternator.
* Pry off the cover for the wiper arm nuts unscrew the nuts and remove both wiper arms * disconnect the windshield washer line remove the single retaining screw release the five push-in retainers and remove the cowl cover * Unplug the electrical connector from the windshield wiper motor * Remove the three wiper motor assembly retaining bolts and remove the wiper motor assembly * Detach the wiper transmission assembly from the wiper motor crank arm * Detach the wiper motor crank arm from the wiper motor assembly * Remove the three wiper motor retaining screws and detach the wiper motor from bracket
You must remove the wipers, cowling, wiper motor and linkage assembly. Then you will remove the power steering lines, connectors and tie rod ends. Next, remove the bolts holding the rack to the body of the car, then remove it through the hole where the wiper motor and linkage assembly was located.
this kind
* Pry off the cover for the wiper arm nuts unscrew the nuts and remove both wiper arms * disconnect the windshield washer line remove the single retaining screw release the five push-in retainers and remove the cowl cover * Unplug the electrical connector from the windshield wiper motor * Remove the three wiper motor assembly retaining bolts and remove the wiper motor assembly * Detach the wiper transmission assembly from the wiper motor crank arm * Detach the wiper motor crank arm from the wiper motor assembly * Remove the three wiper motor retaining screws and detach the wiper motor from bracket
Lift cap on the end of the windshield wiper arm where it connects to the wiper motor assembly. Under the cap you will see a nut. Remove the nut with a 15mm socket. Wiggle the wiper arm back and forth until it comes off.
Under the hood, way in back on the passengers side. Remove the wiper tray/assembly to gain easier access.
# Remove the windshield wiper arms # Remove the cowl cover # Disconnect the electrical connector from the wiper motor # Detach the wiper motor/linkage assembly from the cowl # Remove the wiper motor retaining bolts and remove the motor
* Remove the windshield wiper arms * Remove the cowl cover * Disconnect the electrical connectorr from the wiper motor * Detach the wiper motor/linkage assembly from the cowl * Remove the wiper motor retaining bolts and remove the motor
remove the wiper arms, remove the cowl covers, remove the cowl assembly, that is, the big plastic thing that the wiper motoe sits in. It is held is with about five or six 8mm bolts. Unplug the wiper motor and turn the assembly upside-down to access and replace the wiper motor.