Generally ,at the base of the arm is a small hinged catch that you can gently pry open. Once you do this ,the arm can be pulled off.
The spare tire on a 2003 Pontiac Montana is under the vehicle behind the back bumper. It is lowered from the inside using the lug wrench on the tire iron.
The tire locking nut on a 2003 Pontiac Montana is removed by using a special tool located in the truck of the vehicle. It meshes with the locking nut which allows it to be easily removed.
The 2003 Pontiac Montana takes 24" wiper blades on both sides front and a 16" rear wiper. See sources and related links below for more information. Since there are over 22 different wiper arm attachments, do not buy wipers just by length only - be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.
The ECM is located on the driver's side, under the hood on a 2003 Pontiac Montana. It is on the driver's inner fender.
they are located in the exhaust system Where ? how many 02 sensors on a 2003 Pontiac Montana
You will have to remove the wiper arms, then remove the cowl, and then the wiper motor.
Under the steering wheel
No
The 2003 Pontiac Montana EGR valve is located on the firewall. The valve will be on the driver side of the firewall.
Remove the rear wiper arm from the wiper motor. Remove the wiring harness from the wiper motor. Remove the wiper motor retaining bolts. Reverse the process to install the new wiper motor.
is there a tool you have to have to remove it/
Remove plastic cap, remove nut, sing Twist & Shout, pry up wiper arm...