To remove the wiper motor, first take off both wiper arms at the bottom where they attach to the truck. The attachment is a spline with a spring clip holding it on. You may need to go to an auto parts store, and buy the simple tool made for this purpose, they are not difficult to remove once the spring clip is released. At this point I use a small pry bar to "coax" the wiper arm off you should use a rag to protect your paint. Once you have the wiper arms off open the hood. at this point you will need a small socket & ratchet, the entire sheet metal plate that is between the hood & windshield will need to come off (right under where you took the wiper arms off). When you have this removed & out of the way you will be able to access the wiper transmission where it attaches to the motor, it's just one nut! When you have the transmission unhooked. Disc. the wiring plug from the motor along with the hoses for your washer. Unbolt it and your done! It may be a little stubborn separating it from the body there is some putty in there to seal out water.To install the new one follow the well known "chiltons" directions "to install reverse procedure"
You must first remove the wiper arms. then, remove the screws holding the black plastic grill under the wiper arms. This will expose the motor. You will then need to disconnect the wiper arm transmission linkage from the motor, the remove the three bolts holding the motor on. Install in reverse order.
Remove the wiring harness from the back of your 1994 Chevy Cheyenne wiper motor. Remove the traveling arm linkage. Remove the wiper motor retaining bolts. Reverse the process to install the new wiper motor.
Remove the wiring harness from the back of your 1995 Chevy Lumina front wiper motor. Remove the traveling arm linkage from the wiper motor. Remove the wiper motor retaining bolts. Reverse the process to install the new front wiper motor.
remove wiring harness, remove nuts, place new one (or rebuilt one) on, replace nuts, plug in harness.
replace rear window wiper motor on 2001 Chevy venture
It is attached to the wiper motor. It can be easily changed without removing the wiper motor. Unplug the wire harness to the wiper motor, remove the three small screws holding the cover in place, remove the cover, remove the pulse board.
Vacuum hose diagram for 1959 chevy truck, wiper motor?
Its attached to the windshield wiper motor you will have to remove the cowl to get access to it.
Remove the wiper arm from the wiper motor. Remove the wiring harness from the wiper motor. Remove the wiper motor retaining bolts. Reverse the process to install the new wiper motor.
Remove the wiring harness from the wiper motor. Remove the windshield wiper arm from the wiper motor. Remove the wiper motor retaining screws. Reverse the process to install the new wiper motor.
Remove the wiper arm from the wiper motor. Remove the wiring harness. Remove the wiper motor retaining bolts. Reverse the process to install the new wiper motor.
Remove the rear wiper arm from the wiper motor. Remove the wiring harness from the wiper motor. Remove the wiper motor retaining bolts. Reverse the process to install the new wiper motor.