Simple...
You remove the wheel from the car and punch out the center cap from the backside of the wheel.
5x112
how do you remove a radio from a 1999 e class Mercedes
Remove the tire and wheel from your 1999 Mercury Cougar. Remove the axle end. Remove the wheel bearing retaining nuts. Remove the wheel seal and the wheel bearing. Reverse the process to install your new wheel bearing.
Begin by removing the tire and wheel from your 1999 Dodge Adventure. Remove the end of the axle. Remove the wheel bearing retaining nut. Remove the wheel bearing seal and remove the wheel bearing. Reverse the process to install your new wheel bearing.
Where is the brake switch in Mercedes Benz E320, 1999 located? How do I replace it?
on the back of the steering wheel neer the center area not the part you hold in your hands behind the horn area there are 4 torx or metric bolts remove those bolts and the air bag can be removed do this only after you have disconected the battery
Center the steering wheel with the wheels straight ahead. Remove the steering column trim, remove the ignition lock cylinder, remove the streering wheel. The clockspring is located under the streering wheel, and includes the ignition key-in warning pigtail. You will have to follow the wiring to the base of the column and unplug the connectors. Instalation is in the reverse order as disassembly.
There is a special tool that pushes down the horn plate then remove the "C" clip,then a wheel puller to remove the wheel.
You have to remove the glove compartment.
No, you do not have to remove the wheel/tire.
take a tape measure and measure from the center of the wheel hub, or dead center of all your wheel studs to the top of the brake caliper. then measure the inside of the wheel to the center. if the wheel is bigger it will fit. if the wheel is smaller it wont work.
first off it is easier to do if you remove the air filter. you then need to remove the passengers side wheel and the plastic trim. the battery has to come out through the wheel well.