Want this question answered?
To remove the windshield trim on a 1968 Chevy Impala you will need a trim removal tool that has slides which can release the locking clips.
Your local auto parts store can sell you the simple tools needed to help you remove the windshield trim without damaging the trim or the glass.
Purchase a windshield and door trim removal kit from Harbor Freight for approximately $6 to $15.
Fishing string
Start by pulling back the trim that holds the rubber boot for the mirrors to the bike. Under the boot you will find a screw that holds the front windshield trim, remove the screw, remove the trim and you will be able to see the mounting screws for the shield.
Carefully take the trim off from around the windshield then very, very carefully cut the calk that is between the windshield and the frame loose.
chevy did not offer the ss package on 307 cid engine as far as I know they did offer it on the 350 cid how ever
passenger side under hood, where the hood meets the windshield you have to remove a few scews on the plastic trim
First, remove all weatherstripping from the top of the door. Next, remove all torx screws a the top of the door and remove body piece. Then there are three phillips screws, remove them and the screw just below the windshield. Voila! To remove the rear trim piece, remove interior pilar cover, then the five screws behind it. Done est. Time 20min
To replace a windshield wiper motor for a 1998 F150, first remove the bottom trim on the window. Then remove both wiper blade assemblies and all screws on the metal cowling. Remove the retaining clip from the wiper motor linkage and pull the controls rods off.
Yes. The basic front fenders are the same and interchangeable for 70-74 Novas.
Every car has its own way to remove the windshield. The basic is to remove the cowl (the bottow part of the windshield where the wipers sit on top of, it a long plastic piece) after that you remove the trim (moulding). Then your insert a special tool called a cold knife, looks like a L shape knife. You slide that knife between the pinchweld and the glass, and pull it all around the edge of the glass, this is separating the glass from the poly-uranthane which holds the glass. That all