How do you remove wiper blades on a 2002-2006 Toyota Camry?

Answer 1

In General:

The 2002-2006 Toyota Carmy takes 24" drivers side and 19" passenger side replacement windshield wiper blades. Note, when buying wipers be sure to always use the application guide book at the store, or now-a-days you can Google 'lookup wiper size'. You want to look this up because correct wiper fit is more than correct length, it's also proper attachment. Not all attachments fit all arms. Using the application guide or looking up wiper size online will avoid headaches of buying the right lengths with the wrong attachments.

Additionally, the installation process is simple. The replacement wiper blades will come with step-by-step, illustrated instructions and once you have the instructions and the wiper blades/arms in your hands and in front of you, it will all make better sense and will an easy maintenance task. Very simple and takes 5-15 minutes usually not requiring any tools.

Specifically:

The 2004 Camry uses a J hook type wiper arm (also called a Hook slot connector).

If you look at the underside of blade by lifting it up, you will notice a push clip. Push this push clip and yank the wiper blade downward along the arm towards the base of the wiper arm. It might be just rust or a snug fit but it will release with some force. Once off, you will need to rotate the blade somewhat to get it off the arm.

Tip: once you release the wiper blade off the arm, just remember how you rotate the blade before you take it off so the replacement blade becomes easier to put on...Place new wiper arm clip under the J hook and slide the wiper blade assembly upward till you hear the push clip click (if you take it all the way up, the push pin gets locked in place) - you should not be able to pull the wiper down now. You are done!