Honda Prelude
Honda Civic SI
Honda Prelude SI

How do you repair the headlight motor on a 1989 Honda Prelude Si?

484950

Top Answer
User Avatar
Wiki User
2011-09-12 20:41:06
2011-09-12 20:41:06

I have a '89 Prelude si and one of my headlights stopped working, theres a little black cap under the hood right near the light, it has an arrow on it. try turning that or pulling the cap right off and cleaning insid it. That's what I did and I haven't had a problem since.

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

Yes you can I have 1988 Honda prelude with the 2.0L in it.

User Avatar

Yes, it has an interference motor.

User Avatar

Yes, the h22 is a interference motor.

User Avatar

You could, but because the '94 Prelude is heavier than the '89 Prelude, it doesn't make sense to swap in a smaller powered motor.

User Avatar

Are you talking a stock motor and what year is the car and what motor does it have in it

User Avatar

It depends on what kind of VTEC motor is being swapped into a 1996 Honda Prelude. The H22 series certainly can be swapped in, as it was in the higher trim lines of both 4th and 5th generation Preludes.

User Avatar

unbolt motor mounts use engine hoist

User Avatar

It's hard to say, as the question didn't specify what kind of solenoid are you attempting to fit, and the 1990 Prelude had a mid-cycle refresh which included an improved motor.

User Avatar

I don't know. There might have been problems with the motor.

User Avatar

If you go to corvettemagazine.com and click on there tech link they had an article that tells you step by step with pics how to repair the headlight motors

User Avatar

Yes, with custom mounts available online. You will need the complete swap.

User Avatar

No. The Prelude has a B20A5 motor. The civic will have a D-series tranny. They will not interchange (B and D series parts do not interchange).

User Avatar

Provided the '97 Prelude is a base model, then yes it is possible to swap in an H22a variant. The Prelude Type SH motor is different as the ATTS unit is connected to the motor. So, the only compatible H22a motors would be one from another Type SH, or the JDM Honda Prelude Type S motor.

User Avatar

the blower motor is behind the glove box under the dash

User Avatar

You cant replace it, it's all in one piece.

User Avatar

Hey they usually come with a 2.0 litre b20a motor

User Avatar

it's bolted to a bracket in front of the motor, between the motor and the fans, slightly to the left.

User Avatar

if you really want to know what the biggest motor is that you can get go to www.2geez.com and they have it posted on there which is the biggest you can get and how much it is!

User Avatar

The 97 Honda Prelude motor (h22a) will fit into a 2000 civic with custom mounts (available to purchase online), however you will need the h22a transmission, shift-linkage, axles, and ecu (full swap). The h22a motor will not work with the stock d-series transmission.

User Avatar

i wouldn't swap it, the 87 is carbureated and the prelude is fuel injected, just put the same engine in. the 87 accord engine has less hp .

User Avatar

The standard engine for the 1992 Honda Prelude is the H22. The H16 will also fit. However, it was used in many of the older models.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.