you first have to remove your serpintne belt but i thought there was only one belt on that neon try that drive safe
You can remove your 1993 Mitsubishi alternator belt by loosening the tensioner pulley. Slide the tensioner pulley to the right. The alternator belt will become loose and can be removed. Reverse the process to put the new alternator belt on.
Raise the hood and look for the drive belt. The drive belt powers the alternator.
Is the timing belt on a j30 infinity run the alternator
the belt only goes around the crank pulley and alternator pulley
The alternator belt on a 1993 Nissan 300ZX will typically squeal if it has excessive wear or it has become lose. This provides a good opportunity to replace the belt before it complete fails.
take off serpentine belt and unbolt alternator
locate the alternator take off the belt put new one on then the belt and your done
Remove the belt from your 1993 Chevy G 20 alternator. Remove the alternator wiring harness. Remove the retaining bolts from the alternator. Reverse the process to install the new alternator.
Adjust the belt or replace it with a new one.
It's on the passenger side of the vehicle. When you look at the crankshaft pulley, the Alternator belt is the innermost (closest to the engine) belt.
Remove the wiring harness from the back of your 1993 VW Jetta alternator. Remove the three alternator retaining bolts. Remove the alternator belt. Reverse the process to install your new alternator.