Want this question answered?
It's part of the driveshaft outer cv joint. Replace the shaft as per 2002 Clio 1.5dci
how do you replace the drivers side drive shaft and cv joint?
Lift the vehicle using a jack. Inspect the CV boot for problems. Mark the axle. Separate the CV from the shaft. Remove the CV boot clamps. Use a mallet to knock the CV joint off the shaft. Remove the boot from the CV axle shaft.
It is much cheaper to replace the CV shaft. Purchase a Haynes manual that is specific to your car.
easy
The average cost to repair a CV joint on a 2000 eclipse is about $125. As for the half axle, this might cost about $30.Ê
you can get the cv boot kit that you can glue the join on rather than taking the drive shaft off
apply parking brakes jack front end of car up and put on jack stands remove tires remove brakes and rotor remove spindle by taking of twwo bolts and nuts pull spindle forward take off cv bot clamps and cv shaft will slide out
Don't bother trying to replace a torn boot on a half shaft. It is quicker, easier and cheaper to replace the whole half shaft.
Maybe it is one of the other cv-joints. Each half shaft has two cv-joints. Better off replacing the complete halfshaft with a rebuilt unit than to replace the one cv-joint only.
It's usually much more inexpensive to replace the entire drive shaft than to repair a worn cv joint. The new drive shaft will come with new cv joints and new boots.
The car has only one transaxle, AKA transmission, then no, you cannot remove the tranny without removing the tranny. If you mean without removing CV Axle or drive axle or Axle shaft or CV shaft (same thing) then the answer is still no. You cannot remove the transaxle without removing the drive axle/CV shaft.