0
What else can I help you with?
How do you replace a wheel hub on a 1997 cavalier?
Front or rear?
How do you replace a wheel hub assembly bearing seal on a 1993 dodge shadow?
Front is easy, just replace hub rear is pressed in
How do you replace the rear wheel bearings on my 2002 vivaro van?
You replace it as part of the rear disc assembly. Remove rear wheel and hub nut cover undo hub nut,then remove the rear caliper and pull the disc off the stub axle.
Can you replace The rear wheel bearing or do you have to replace the entire wheel hub assembly on a 2003 ford expedition?
You can replace both... Bearing or Hub... Bearings are cheaper, but harder to find and replace. Hub assemblies are easier to replace, but slightly more expensive.
How do you replace rear wheel bearing hub on 2002 Hyundai xg350?
nO
Replace rear hub and bearing 1999 Honda crv?
how hard is it to replace a rear wheel bearing 1999 Honda crv. this crv does not have rear axle's in it. thank you
How do you replace the rear wheel bearing on a 2003 Pontiac Montana?
The bearings are not replaceable, they are a part of the rear hub assembly - the studs and the bearings are pressed in - replace the whole hub assembly - 4 bolts are holding it. Rear bearing/hub bolts (new only) are to to be torqued to spec. [2000 Montana - 85 Nm (63 lb ft)]
How do you replace a rear wheel bearing on a 2000 Chrysler neon?
It's simpler then it looks. Remove the wheel then the brake drum, with a flat head screw driver remove the dust cover. you will need a large socket to remove the nut. I bought one at Auto Zone I beliieve it was a 36MM but the package says earley Chrysler Front hub nut socket (same nut for the rear) after removing the nut the hub and bearing asy will slide off. When putting on the new hub make sure you grease it with bearing grease
How do you replace a rear hub on a Volvo xc90?
To replace a rear hub on a Volvo XC90, start by safely lifting the vehicle and removing the rear wheel. Next, detach the brake caliper and rotor to access the hub assembly. Use a socket or impact wrench to remove the hub's mounting bolts, then carefully pull the old hub off the axle. Install the new hub by reversing the steps, ensuring all bolts are torqued to specifications and the brake components are reassembled properly.
How do you replace a rear wheel bearing assembly on a 2004 Chevy venture?
taking out rear hub asembly on a 2002 Chevy ventura
How do I replace the rear hub assembly on my vehicle?
To replace the rear hub assembly on your vehicle, you will need to first lift the car and remove the wheel. Next, disconnect the brake caliper and rotor. Then, unbolt the hub assembly and remove it. Install the new hub assembly by reversing these steps. Be sure to torque the bolts to the manufacturer's specifications and test the brakes before driving.
Can you replace the rear wheel bearings in a 2003 Buick Rendezvous or do they come only as a hub assembly?
The rear wheel bearings in a 2003 Buick Rendezvous are integrated with the hub, therefore they are only available/replaceable as an entire hub assembly. The rear hub assembly costs around $200/each, depending on the specifics of the vehicle (2WD or 4WD).
