To replace a rear hub on a Volvo XC90, start by safely lifting the vehicle and removing the rear wheel. Next, detach the brake caliper and rotor to access the hub assembly. Use a socket or impact wrench to remove the hub's mounting bolts, then carefully pull the old hub off the axle. Install the new hub by reversing the steps, ensuring all bolts are torqued to specifications and the brake components are reassembled properly.
Front or rear?
Front is easy, just replace hub rear is pressed in
You replace it as part of the rear disc assembly. Remove rear wheel and hub nut cover undo hub nut,then remove the rear caliper and pull the disc off the stub axle.
You can replace both... Bearing or Hub... Bearings are cheaper, but harder to find and replace. Hub assemblies are easier to replace, but slightly more expensive.
nO
how hard is it to replace a rear wheel bearing 1999 Honda crv. this crv does not have rear axle's in it. thank you
The bearings are not replaceable, they are a part of the rear hub assembly - the studs and the bearings are pressed in - replace the whole hub assembly - 4 bolts are holding it. Rear bearing/hub bolts (new only) are to to be torqued to spec. [2000 Montana - 85 Nm (63 lb ft)]
taking out rear hub asembly on a 2002 Chevy ventura
To replace the rear hub assembly on your vehicle, you will need to first lift the car and remove the wheel. Next, disconnect the brake caliper and rotor. Then, unbolt the hub assembly and remove it. Install the new hub assembly by reversing these steps. Be sure to torque the bolts to the manufacturer's specifications and test the brakes before driving.
To replace the rear hub assembly on a 2001 Buick Century, first, lift the vehicle and secure it on jack stands. Remove the rear wheel and brake components to access the hub. Unbolt the hub assembly from the axle and the suspension components, then carefully remove it. Install the new hub assembly in reverse order, ensuring all bolts are tightened to the manufacturer's specifications before reassembling the wheel and brake components.
The rear wheel bearings in a 2003 Buick Rendezvous are integrated with the hub, therefore they are only available/replaceable as an entire hub assembly. The rear hub assembly costs around $200/each, depending on the specifics of the vehicle (2WD or 4WD).
You need to replace the rear wheel hub - bearing and speed sensor inclusive