1. Open the trunk and remove the 2 black screws facing the back of the car. 2. There is another screw that is placed in the center of the tail-light but from the inside (in order to see it you have to move over the trunk cloth) that needs to be removed. 3. You will see on the inside of the trunk 2 plastic black bolts that are sticking from the side. Do not worry about them, they hold two brackets on the outside of the car. 4. Just grab the light assembly and pull hard straight back. Doesn't need to pull left or right just straight backwards. Good Luck. DP.
how do you replace 1999 Toyota corolla corner light - passenger side
Check the brake light switch located under the 1989 Toyota Corolla. If the switch is stuck the parking light will continue to stay on.
A malfunctioning brake light relay switch will cause your 1993 Toyota Corolla brake lights to stay on all the time. The brake light relay switch is located beneath the drivers side dashboard.
Defective or mis-adjusted brake light switch
Usually at the top of the brake pedal. Usually at the top of the brake pedal.
Bring it to the dealer
To replace your brake light, you need to unscrew the brake cover from the inside of the trunk. Then you will be able to pull the old bulb out and replace it.
A brake light switch may be bad if a 1996 Toyota Corolla will not go into gear and the brake lights don't work. Another issue could be in the shift lock solenoid.
omfg what light bulb? the one on the back porch?
It's because you have a short current somewhere. You need to check the brake light wiring.
The lamp in the top brake light of a Toyota Highlander can be replaced by the locating the light housing from the trunk. Find the light cover and remove it to access the lights. Replace the bulbs.
I do not know! , just do it your self, the move the old one and go buy a new one do it your self its much cheaper! :)