Want this question answered?
How do you replace a 1996 Grand Prix front bumper?
rip it off
Remove the bumper and put on a new one :)
You have to replace the entire headlight assembly not just the cover.
I would replace the bumper cover. They are very flexible and any attempt to repair will probably not last long. There are several places that sell aftermarket oem replacements for around $140
If you look at the rear bumper real close, you will see it written in the black cover that's close to were the ball go's.
Replacing a Side Rear BumperThere should be just a few screws underneath the cover on the insied or i think its a bolt that's welded on with a nut.I'm not sure cause I just took mine off to put on a custom bumper. It looks much nicer than all the ones out there.
I wasn't aware there is a 1996 model of Malibu, but on my 1998, the horn is behind the passenger side front fender, between the bumper and wheel. To access it, you must remove the entire front bumper cover.
The GEM in a ford windstar is located up inside the dash, above and to the left of the gas pedal. it's held in with a single bolt.
There is a screw on the side of the signal, you can reach it through the middle of the bumper. unscrew that and the whole signal will come out of the bumper. pop the clips and then the lens will come off
The horn is located behind the front bumper fascia * Remove the front bumper fascia * Unplug the horn electrical connector and remove the bracket bolt
* Remove the front bumper fascia * Unplug the horn electrical connector and remove the bracket bolt