unplug wire remove 2 7/32 bolts remove sensor
To change the camshaft positioning sensor on a 98 GMC Jimmy you need to first locate it. The sensor is located within the distributor. Next, unbolt the old sensor and replace with a new sensor.
the camshaft position sensor is on the left side of the engine , at back on the upper side . you have to demont the conector , than unscrew and replace it
Most Camshaft Positioning Sensors are "Plug and play", if not I do not recommend playing with it if you are unsure have a mechanic do it.
there are many different things that it could be check the camshaft positioning sensor, the throttle positioning sensor, and the crankshaft positioning sensor.
where is the camshaft exhaust positioning sensor on the in-line 5 cylinder motor, 2006 hummer h3
---------------------------------------------------------- The camshaft positioning sensor is hidden behind the starter motor on the 3.5 6-cyl. engine. I think it's the same for the 4.0. The starter motor must be removed to replace the sensor.
pro
The 2003 Mazda camshaft position in sensor can be found on the back of the left-hand cylinder head. The camshaft position sensor should be labeled as such.
Inside the distributor.
have never heard of a cam angle sensor. the cam does not change angle.it stays put in the bearings
In order to replace the camshaft position sensor, you would need to disconnect the electrical plug holding it in. Using a socket, hold down the bolt and remove the camshaft position sensor.
still waiting on a answer , is it the same as a 2.3?