answersLogoWhite

0

The 2.4l is located on the right side of the engine. You will see the plug clearly from the top of the engine

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

Where is the crank angle sensor on a 92 eclipse?

the cam angle sensor is the crank angle sensor it preforms both jobs


Do you have to replace anything else along with the camshaft sensor?

Usually pretty common to have the replace the crank sensor or crank angle sensor. Before you do replace the camshaft sensor check that your timing is right on because this is the issue with about 75% of vehicles.


How do you replace a crank angle sensor on mercury sable?

You need to remove the serpentine belt and alternator in order to get the crank sensor; one 10mm bolt holds it. It is easy to replace.


Where is the crankshaft position sensor located on a 1994 Mitsubishi Eclipse?

On a 94 Turbo DSM there is no crank angle sensor. The Cam Angle Sensor(CAS)serves the function of both a crank and cam sensor, and it's located on the passenger side of the valve cover at the end of the intake camshaft, you can't miss it.


How can you check to see if a crank angle sensor is bad on a 1991 Mitsubishi Eclipse?

You will have to test the resistance on it to make sure it is within specs.


How do you replace a pajero v6 crank angle sensor?

To replace the crank angle sensor on a Pajero V6, first ensure the vehicle is turned off and disconnect the battery. Locate the crank angle sensor, typically found near the engine’s front or side, and remove any necessary components for access. Unscrew the old sensor, disconnect the wiring plug, and install the new sensor by reversing the removal process. Finally, reconnect the battery and start the engine to check for proper operation.


Where is the crank angle sensor on 1994 Honda civic?

The crank angle sensor is located in the distributor.only in the 94 and 95 Honda accord.


How do you adjust timing on a 1991 Mazda miata?

You adjust the timing by moving the crank angle sensor. The crank angle sensor is driven by the camshaft closest to the intake manifold (passenger side of the engine) and is located behind the cylinder head and valve cover. Losen the bolt that secures the crank angle sensor, in order to move the crank angle sensor.


Does a 95' eclipse have a cam senor?

yes it dose, it has a cam sensor and a crank sensor,


Where is the crankshaft position sensor located on a 1998 Mitsubishi Eclipse?

Crank position sensor is located next to the crankshaft. In order to replace it you might have to remove the timing belt. In the most models you just can remove remove the timing belt cover and replace the sensor.


Why after car is warm looses spark?

Frequently this is caused by a faulty crank angle sensor. As the engine heats up the sensor goes open circuit and there is no pulse to trigger the spark or the injectors. When it cools enough the circuit reforms and the engine will run for a while. Replace the crank angle sensor and the problem should go away.


Do you need to replace cam sensor after replacing the crank sensor?

if you have a code w/ cam to crank reference then yes. if only a crank sensor issue the no