You need to remove the serpentine belt and alternator in order to get the crank sensor; one 10mm bolt holds it. It is easy to replace.
Usually pretty common to have the replace the crank sensor or crank angle sensor. Before you do replace the camshaft sensor check that your timing is right on because this is the issue with about 75% of vehicles.
the cam angle sensor is the crank angle sensor it preforms both jobs
To replace the crank angle sensor on a Pajero V6, first ensure the vehicle is turned off and disconnect the battery. Locate the crank angle sensor, typically found near the engine’s front or side, and remove any necessary components for access. Unscrew the old sensor, disconnect the wiring plug, and install the new sensor by reversing the removal process. Finally, reconnect the battery and start the engine to check for proper operation.
The crank angle sensor is located in the distributor.only in the 94 and 95 Honda accord.
You adjust the timing by moving the crank angle sensor. The crank angle sensor is driven by the camshaft closest to the intake manifold (passenger side of the engine) and is located behind the cylinder head and valve cover. Losen the bolt that secures the crank angle sensor, in order to move the crank angle sensor.
Frequently this is caused by a faulty crank angle sensor. As the engine heats up the sensor goes open circuit and there is no pulse to trigger the spark or the injectors. When it cools enough the circuit reforms and the engine will run for a while. Replace the crank angle sensor and the problem should go away.
if you have a code w/ cam to crank reference then yes. if only a crank sensor issue the no
How do you replace crank shaft sensor on 2005 Chrysler 2005 300c?
The 2.4l is located on the right side of the engine. You will see the plug clearly from the top of the engine
How much will it cost to replace a cank sensor on a Mazada 626?
next to the crank pulley
heyo captin jack