You have to replace the distributor assembly.You have to replace the distributor assembly.
How do you replace the ignition distributor on a 93 mx6 v6 pics?
The cam shaft position sensor is located under the distributor cap. You can replace this easily by undoing the screws holding on the distributor cap, remove and replace the sensor, then just replace the distributor cap.
On the 2000 model it is part of the distributor and you either replace complete distributor or try to dismantle the distributor and replace sensor only.
The cam sensor is part of the distributor. You have to replace the entire distributor.
the faulty part is actually located in the distributor so you need to replace the whole distributor
buy a new distributor
It is part of the distributor. You have to replace the distributor
Inside the distributor. Replace the whole distributor.
there is no distributor on a 98 rav. therefore no cap or rotor. replace the plugs and wires and the tuneup is done
Does it have a distributor? I thought these cars ran on the harmonic balancing system
The 2000 Saturn does not have a distributor. Instead it uses a "coil pack" system.
it depends is it a lt-1
Yes you do. You have to take the distributor shaft out of the distributor to Remove the pick-up coil / stator.
i would replace the camshaft positioning sensor.obviously your mechanic has no clue
It is in the distributor, you have to buy a distributor to replace.
it is distributorless no cap to replace has coil packs
If there is leaking around the base of the distributor, and you will need to replace the seal. The distributor oil seal is a paper gasket or rubber O-ring, and the distributor is removed to replace either one if the seal is leaking. It is easy to change, just remove distributor and change the seal.
you have to remove the distributor covers.
Replace the screws.
remove the distributor cap and pull the thin disc like cam sensor over the shaft of the distributor then replace it with the new one.
The part itself for that distributor $1000.00
It is inside the distributor. You have to replace the distributor to service the cam sensor.