You will need to take the current shifter cable off, and to do so you'll need to open the dash and console so you can reach the plate keeping the cable in place. Next, thread it (the replacement) through the firewall, and this area, and connect it. Put everything back together after making sure it is secure, and you're done.
Disconnect both ends of cable, unbolt only drivers side of bench seat from floor, lift up drivers side of bench seat and block it up with a piece of wood, roll back flooring material to expose the cable, pull cable up from hole in floor, reverse procedure to install, adjust cable at transmission end.
part is between 75 and 150 depending on quality & source.
and an hour to install about 100.
so about 200 to 250 for a repair facility
In replacing the power steering pump on a 1993 Toyota Camry wagon with V6 engine, make sure to replace the steering pressure hose and clamp also. The leaks on both the hose and the clamp are the cause of the broken power steering pump.
google ...toyota-autobestanswer. a free file there.
No, it's easy.
get a tap and die set and follow the instructions.
You might try this website. http://www.toyotaownersonline.com/parts-service/diy.html
? wiper switch toyota camry 1999 replace
how to replace the washer pump on a 2009 toyota camry
where is the thermostat located in a 1999 Toyota Camry located and how do you replace it.
Answering "How do you replace the water pump on a 1994 Toyota Camry?"
The 1989 Toyota Camry shifter linkage cables have adjustment swivel nuts on each end of the cable. Turning the swivel nuts will lengthen or shorten the shifter linkage cable.
94 toyota camry
more or less 5,000 pesos including labor!
how to install replace air intake hose toyota camry 1998
how much it cost to replace alternator for toyota camry 2003
Where is the thermostat located and how do you replace it on 1992 toyota camry 4 cylinder ingine
how do i replace a power steering pump in a 1990 toyota camry?
Yes, you should be able to do that.