0
How do you replace a starter in a 1992 S -10 blazer 4.3L 4x4 with manual trans?
Wiki User
∙ 13y ago
Easiest to get to through passenger side wheel well. Disconnect battery cable (either one). support vehicle well, remove wheel. remove both wires from starter. use 13mm or 1/2" (same size) i think there is 3 bolts holding it to engine.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
How do you change the starter on 1987 blazer s-10 with manual trans?
Remove the positive battery cable from your 1987 Chevrolet Blazer battery. Remove the starter cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install the new starter.
Can you use any manual trans from 88 to 98 blazer for your 98 blazer?
No
Why would the starter on a 1977 trans am not be getting power?
Have you checked the ignition switch on the column . I had to replace the one in my 1977 Trans Am.
How do you replace starter on 1998 Kia Sportage with auto trans?
this has already been answered in another question see how do i replace a starter motor in a 1998 kia sportage with automatic trasmission ?
How do you replace a transmission oil filter on a 1995 s10 manual?
manual trans it doesn't have a filter, only the automatics have one.
Where is the solenoid on 2002 Dodge Grand Caravan?
Starter solenoid is on the starter, trans solenoid is on the trans.
Where is the dipstick in a 1998 Chevrolet Blazer 2dr 4wd?
trans or oil? oil is in front left. i dont think the 98 blazer has a trans dipstick. Instead, there is a bolt on the side of the trans.
On 78 Trans Am where is starter solonid?
Mounted to the starter.
Where is the solenoid on a 1997 Dodge Ram?
Starter solenoid is on the starter. Trans solenoids are on the valve body, in the trans.
How do i replace the starter on your 93 eagle talon?
you can get it from the top on the trans side. 2 bolts and 2 wires. its a little tight but it will come out.
How do you remove a starter out of a 4.3 Chevy s-10 with a manual trans and 4 wheel drive?
You will need to loosen the motor mount on the side of the starter to jack up the motor slightly to remove the starter after removing the bolts that hold the starter on to the engine. Remove all wires from starter also.
Will a 96 blazer transmission fit a 95 blazer?
Possibly, but you haven't said which engine or trans.
