The exact procedure will vary by exact year, however here is the general Mitsubishi Raider tail light bulb lamp replacement procedure: Purchase the correct replacement tail light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information and full light bulb part numbers list. Then consult your owner's manual for the tail light bulb lamp replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
afshar13@yahoo.com
Take 2 screws out and pull light straight back, it will come over, replace bulbs and put back on and replace screws
well its easy look up your bum ya monkey!
you don't replace the tail light you just replace the bulb in it
peel off carpeting behind the tail light from the trunk. there should be bulb holders- pull out the holder that holds the busted bulb. you can do this by slightly turning it and pulling it out. change the bulb and replace the holder the same way you removed it.
You open the trunk and remove the plastic wingnut screw on the backside of the tail light and replace the bulb and put the nut back on...very easily done without tools...
Phone your local Mitsubishi dealer
The 2002 Mitsubishi Gallant tail light fuse is located in the first column of the fuse box. The tail light relay switch is also in the fuse box, at the top of the third column.
On a 2012 toyota Highlander, How do you replace tail light Assembly
Remove tail light housing. Remove lamp. Replace lamp. Replace tail light housing.
you can take the tail light out by unscrewing the wing nuts in the trunk, when all wing nuts are off pull the tail light out then take the light bulbs out to replace the tail light.
You can not, you will have to replace the entire tail light.