0
i just did that today. i heard it was hard but it was rather easy. follow the top radiator hose up to the engine. there is 3 bolts unscrew them.. u may have to bend the bracket out of the way for the bottom bolt.. we did. it isn't used for anything anyway. when u get the bolts removed, pull the hose back and the thermostat is right there. its tricky to get a socket in there. we used a bender. good luck ;]
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Where is the computer on a 95 Chevy Lumina?
Where is the computer on a 95 Chevy lumina
Will a 96 Chevy Lumina air conditioning compressor fit on a 95 Chevy Lumina?
No, the compressors and mounting points are different on the 95 Lumina
How do you stop Chevy lumina 95 from runnuing hot?
Replace the coolant, thermostat, turn off the A/c, in emergencies drive with the heater on, increase the air flow through the radiator, have your radiator checked for blockage.
What causes both cooling fans to stop working on a 1995 Chevy Lumina?
the thermostat will make both fans become idle if it is not opening. this happened to me on my 95 3.1 lumina
Crankshaft sensor for a Chevy Lumina?
Where is the crank sensor on a 95 chevy lumina car ?
How do you replace an alternator on a 95 Chevy lumina 3.4l?
The alternator on a 95 Chevy Lumina 3.4l is replaced by disconnecting the wiring harness, loosening the retaining bolts, and removing the serpentine belt. The alternator can then be unbolted, removed, and a new alternator installed.
How do you change brake lines on a 95 Chevy lumina?
completely
Where is the carburetor on a 95 Chevy Lumina?
Has no carburetor. It is fuel injected.
Diagram for ignition switch 95 lumina?
I need a Diagram for a 1995 Chevy Lumina iginition switch??
Where is the crank sensor on a 95 Chevy Lumina?
Behind the harmonic balancer.
I have a 1995 Chevy Beretta with a bad 3.1L and a 1993 Chevy Lumina with a good 3.1L motor is this a possible swap?
the beretta and lumina motors are about the same i have a lumina motor in my 95 beretta
How do remove and replace a ball joint on a 95 Chevy Lumina?
once have ball joint loose have to drill/remove the rivits holding it in, will be replaced with bolts/nuts
