The Ford Windstar has the most common hook-end wiper arms. See sources and related links below for installation videos. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.
The 2002 Ford Windstar takes 24" driver side, 20" passenger side and 16" rear replacement windshield wiper blades.
The 1996 Ford Windstar takes 24" drivers side, 20" passenger side and 16" rear replacement windshield wiper blades.
You will have to remove the wiper arms, then remove the cowl, and then the wiper motor.
Heat cut the windshield out, just make sure not to damage the brake lights, and the windshield wiper, fit the new glass to the back, and weld it on the inside after removing the fabrication, put the fabrication back on, make sure the brake lights and windshield wiper work, and if they do, you're good, if they don't, visit an inspection shop, they'll hook ya up.
Just in case this question is missing the word wiper or washer fluid...See "Related Questions" below for that answer...
read owners manual for info
No separate container to fill for the rear. The front washer solvent reservoir serves both front and rear sprayers.
When the windshield wiper on a 2000 Ford Ranger comes on by itself this can signal a damaged windshield wiper switch. Changing these switches out often corrects this problem.
Take it to a Ford Dealer.
Check the Owners Manual (see below), or take your van to a place that installs them for free. Have the person show you how to do while they install your new ones - you'll be ready for the next time.
Depending on year, the Ford F-250 usually has U-hook wiper arms. See U-Hook wiper blade arm attachment video below.
How do you replace the windsshield wiper relay in a 2004 Ford Focus. It would appear that the relay is in the fusebox, but access to it is impossible. Looks like the fusebox may need to be removed to access.