Removal
Remove the air cleaner outlet tube.
Disconnect the mass air flow (MAF) sensor electrical connector.
Disconnect the breather pipe.
Remove the air cleaner.
Fully loosen the exhaust gas recirculation (EGR) valve to exhaust manifold tube nut from the bottom of the EGR valve.
Disconnect the vacuum line from the top of the EGR valve.
Remove the EGR valve.
Remove and discard the EGR valve gasket.
Installation
NOTE: Use a new EGR valve gasket when installing the EGR valve.
To install, reverse the removal procedure.
nope has to be the 32 valve engine
do you have the 3.0 V6 12 valve engine, or the 3.0 V6 24 valve DOHC engine? 3.0 v6 12 valve
On a single cam ford focus 2000-2001 the cam position sensor is below the pcv valve. If looking at the engine it is on the right side, rear, about a 3inches from the top of the engine.
how to replace water pump on 2001 ford focus
The 2001 Ford Focus has an inline 4 engine.
on the bottom half of the air box, theres a whole on the lower left that connects a pipe to the engine
solenoid 2 valve ford focus
The 2001 Ford Focus has a 2.0 L base engine size.
"Positive Crankcase Ventilation" Catalytic converter burns up oil smoke sucked out of the engine from the PCV.
The 2001 Ford Focus's engine produces 130 hp @ 5300 rpm.
The 2001 Ford Focus's engine produces 135 ft-lbs. @ 4500 rpm.
Go here: http://www.focushacks.com/index.php?modid=83 Or get a Haynes manual - it's not too difficult.