The exhaust back pressure sensor on a 2006 6.0 diesel Ford F3 50 can be located near the exhaust manifold. The sensor is a probe that can be removed by loosening the nut.
Feel the exhaust manifold at each cylinder as it is running, if an injector isn't working the manifold at that cylinder exhaust port won't get hot. Some of those Ford diesels had a problem with the electrical connection where the injector harness passes through the valve covers.
How do you change the alternator on a 1996 ford F350 diesel
It is part of the exhaust system before the muffler under the vehicle
I need a diagram of ford F350 drum brakes on 1996 model 460 engine 4 wheel drive
how do you replace a fitting from a high pressure oil pump that is leaking oil in a 2001 ford F350 diesel truck?
the model year 1992-1996 the tailgates and body styles for the f150, f250, and f350 were that same and the 1997 f250 and f350 were the still the same design. The f150 however were not. so in short it will fit a 92-96 f150, or a 92- 97 f250 or f350.
Where is the belt tensioner on a ford 2003 f350 6l diesel? i need to loosen so that i can replace the alternater
yes you can BUT it has to be a larger pipe to get the turbo sound out of it
The plug should be hidden in the bumper in the vents.
Just got my 2004 F350 back from the shop and they had to remoce shroud for easier access
This is a common problem with Ford engines. A scratch is allowing exhaust gasses to seep past a head gasket and into a water jacket. Replace your engine coolant replaced annually until you are ready to have the heads resurfaced.
Inside of the clock or hood text 4434660178 for more
From what I have been told the knock sensor on a Ford Triton V10 is under the intake manifold. According to local Ford Dealer intake manifold has to be removed to replace the sensor. I am looking for diagram to see if there is another way. I will have to find engine manual to be sure and will post if I find anything new. A Pack Rat ate the wire leads off of mine.
No, the 2003 Ford F350 rims will not fit on a 1999 Ford F350.
6.4L Power Stroke Diesel Engine fitted to 2008 - 2010 F250, F350 and F450 pickup trucks and F350 + Cab Chassis SPONSORED BY:
If the window motor runs, replace the plastic spacers with ball bearings or bolt nuts. Oliver said it.
1987 Ford F350 want stay running
should have two holes on both sides where you put the radio removal tools
Yes, the rims off a 2002 Ford F350 will indeed fir on a 1999 Ford F350.
The firing order for a 1996 Ford F350 4x4 7.3L diesel is 1, 2, 7, 3, 4, 5, 6, 8. The cylinders on the left from front to back are 1, 3, 5, 7 and on the right they are 2, 4, 6, 8.
DePends on how you drive and if your towing and mods but my 1996 f350 7.5l ext cab long bed 2wd gets about 11mpg
ive done a wrecker conversion but running my chip, exhaust, intake, and with my 4.10 rear end i top out at 97mph
2006 f350 6.0 powerstroke. 420,000 miles. Replace injectors and ipr at 400,000