You have to remove the alternator, throttlebody (use plenty of wd40 and a pipe wrench getting the egr tube disconnected from the egr valve, remove the radiator hose. Use a U joint wrench to get the # 7 bolt out which is located on the drivers side under the wiper module. That's pretty much how I got mine off and I know its a pain in the butt . Hope this Helps:)
alot
Intake manifold gaskets are leaking, intake manifold is warped.
For the manifold see link below for detailed info on the class action settlement and detailed DIY instructions... http://www.autoclinix.com/Manifold.htm Is the intake cracked? Is it a 4.6L? If so, a recent class action settlement extends the warranty, on the intake, to 70,000 miles. Don't replace with OEM manifold.
how to replace a distributor gasket on a 2000 Pontiac grand am 3.4l
Pretty straight forward. You must remove the intake manifold in order to replace the gasket.
if not on the valve cover, then this engine will be one of the newer 5.0 engines with an intake manifold similar to that of a mustang. the pcv valve will be located on the backside of the intake manifold near the firewall, you will have to feel for it.
YES , a 1990 Mercury Grand Marquis 5.0 liter V8 engine has a PCV valve ( Motorcraft part number EV-98-B ) going into the intake manifold
The job takes anywhere from 6 to 8 hours, the part can be had for around $ 250.00. So, just find a fair labor person to do the job.
No. If you have c.o.p. ( coil on plug ) just remove the coil, there's the plug.
How do you replace the timing chain on a 1994 mercury grand marquis
The intake manifold, on your Jeep grand Cherokee, is located on the front side of the engine. The exhaust manifold is bolted to the engine.
how do i replace a passenger side headlamp for a 2004 grand marquis gs