Disconnect all the hoses going to the engine, under neath the car unbolt the bolts from the bell housing from the transmission, disconnect all the wires that goes to the engine, unbolt the engine from their mounts. Attach the engine jack to the intake manifolds bolts then jack up the engine and take it out. I hoped this helped
how do you replace a resister on a front heater blower on a 2006 chrysler town and country touring with a 3.8 motor
A diagram outlining how to replace a blower motor in a Chrysler Pacifica can be obtained from most auto-parts stores. Many Chrysler dealerships will also make the diagram available.
Usually the blower motor resister has gone bad.
The blower motor is inside the bottom of the hvac housing, under the dash on the passenger side.
A heater blower in a 2005 Chrysler Pacifica is a complicated process. To get this [project done, you will have to go to a mechanic and have it done.
replace heater relay and or heater blower motor
On an auto temp system the blower motor resistor has failed and needs replaced.
The blower motor resistor is over the passenger side strut tower, under the hood.
Resistor or blower motor power module.
Blower motor resistors are usually located close to the blower motor.
It is behind the glove box.
Check the blower motor resistor