Remove the wheel. Use an Allen key to remove the two screws attaching the caliper. I put a long metal bar over the long part of the Allen key for leverage. Lift the caliper off the roter and remove the pads. Use one of the old pads over the caliper piston and a c-clamp to push the caliper piston back into the seat. Be sure to push it all the way in or the caliper will not fit over the rotor once the new pads are installed. I found that the sleves in the caliper where the bolts go also need to be pushed back or they will prevent you from fitting the caliper back on. Then you should be good to go. VBdenny
See below article-
If you are wondering whether it is possible to replace one's own brake rotors or not because you drive an older vehicle that need brake rotors replaced, then the answer is no.
no but it is recomended.
replace rotors, sounds like they are warped. if you can feel the pulsation in brake pedal they could be warped..
when needing brakes do you have to replace the rotors to on a s60r
under the hood in black box
depends on the condition od the pads. If worn or have groves etc from the rotors then replace.
how much does it cost to replace brakes rotors on honda crv
take it to a shop
1500 or 2500???
the rotors are front mounted brake (pads) and the rear are usually the spring type ..also known as(shoes)
For sale brakes rotors