loosen lug nuts, jack up vehicle after chocking wheels. (place jack stands under vehicle)Remove tire(s), then remove brake caliper(s) using 14mm wrench/ socket. (do not need to disconnect brake line) On the bake side of the brake dust cover there are two more bolts that hold the caliper bracket to the axel assembly, remove those two bolts. Depending on age of vehicle, you may meet some resistance and a rubber mallet or ball peen hammer may be necessary. Tap the rotor near the hub, face and back of rotor to loosen. Again, you may have do this repetively while turning the rotor with your hand so it will be jarred evenly .
adjusting Isuzu rodeo brakes
How I can replace ignition switch cylinder from Isuzu Rodeo?.
how do you replace coolant temp sensor on a rodeo
How do I remove the front shock bottle pin of my Isuzu rodeo 2000
Replace Replace
I don't think that will work unless you change over to rear disc brakes, the hub should not match.
how do you remove transmission in 1999 rodeo
replace water pump on a 1994 rodeo replace water pump on a 1994 rodeo replace water pump on a 1994 rodeo replace water pump on a 1994 rodeo 6 cylinder
DOT 3
Hi, How Do You Replace a Starter on a 1995 Isuzu Rodeo, V6, 3.2 liter engine? Does anyone know where the starter is? Help. How Do You Replace a Starter on a 1995 Isuzu Rodeo, automatic, 4wd, V6, 3.2 liter engine? Does anyone know where the starter is? Thanks alot.
Possible warped rotor. Turning rotors doesn't get rid of warp. Brake shop needs to check for this and replacement of rotor is cure for this problem
How to Install Front Brake Pads Check Related links below.