Want this question answered?
It is on the front driver side of the timing cover.
With an o2 sensor socket.
The cam sensor is part of the distributor. You have to replace the entire distributor.
Yea, the crankshaft sensor is under the distributor and the camshaft sensor is inside the distributor, you cannot change it so you will have to replace the whole distributor.
The Crank position sensor is located on the right side behind the wheel about midway up the motor eaiseier to get to from the bottom with 10mm socket one bolt
It is in the distributor, you have to buy a distributor to replace.
Loss of fuel (fuel pump) loss of ignition ( crankshaft or camshaft sensor or wiring)
The crankshaft sensor is located on the passengers side of the transmission housing, above the differential housing. The bottom of the sensor is positioned next to the drive plate. The cam sensor is located on the left bank cylinder head
The cam sensor is not adjustable.
The crankshaft sensor is located on the passengers side of the transmission housing, above the differential housing. The bottom of the sensor is positioned next to the drive plate. The cam sensor is located on the left bank cylinder head
No.
In order to replace the camshaft position sensor, you would need to disconnect the electrical plug holding it in. Using a socket, hold down the bolt and remove the camshaft position sensor.