Want this question answered?
The crankshaft pulley has broken causing the outer ring to slide forward into the fan assy. replace your crankshaft pulley and all will be well
no
remove center bolt and use the required puller
yes
no
It's a big job. You have to remove alternator and air cond. belts. Remove crankshaft pulley, then remove timing belt assembly cover, then remove timing belt, then pull out crank sprocket. After that you get the old crankshaft seal out and put in new one. Put then everything back in reverse order. Done.
The crankshaft pulley is the large pulley on the lower passenger side of the engine.
Disconnect the battery and remove the fan assembly and crankshaft belts. Remove the center bolt from the pulley and use a crankshaft pulley remover to pull off the pulley. You can usually borrow one from an auto parts store.
It is located behind the crankshaft harmonic balancer pulley on the bottom front of the engine. The right lower splash shield and harmonic balancer pulley must be removed to replace it.
the crankshaft sensor is located behind the crank pulley. the bottom pulley
The crankshaft position sensor is located at the lower left hand side of the crankshaft pulley. The crankshaft pulley is the large pulley located in the center lower portion of the front of the engine.
The crankshaft pulley unbolts from the harmonic balancer. The harmonic balancer can be removed from the crankshaft with a 3 bolt puller.