there are some tiny torx head screws located between the blinker and headlight lenses. unscrew these and pull the blinker lens out just a little and be careful because the wiring and plugs for the bulbs are not very long. also on either side, the lens slides in a track so you need to pull it slowly and straight. the bulb sockets simply unscrew and you then can replace the lens. be sure that the lenses slide back into the tracks. i installed clear blinker lenses and its easy to do
replace front brake rotors and pads.
how do i find out if i have ABS on my front wheel bearing , on my 2000 dodge Dakota quad cab 2 wheel drive
you look on another site and in the mannual
yea i bought a 1992 dodge Dakota back a couple years ago from a guy that had ran into a tree i had to replace the front end and all the parts i got ranged from 1991 to 1995 so hope this helps you out
howdo you change the front axel of a dodge Dakota 2000 4x4
youll most likely have to buy the whole hub assembly. I had to do that to my 94 dodge dakota.
Replace the front upper and lower ball joints.
you have to grind the welds that hold the frame rail to the rest of the frame and slide the ends out . replace the frame rails and weld it back.
they are in front and after your cat
Front driver side.
On the front of the throttle body.
the front are 6.5 and the back are 5.25