there are two plastic insert screws under the hood.two 10mm bolts in the same spot.then there is one more 10mm bolt under the headlight assembly at the edge use a long 1/4 inch extension go between the bumper and headlight at the outside near edge of headlight assembly after that slide it out .
how to replace tail lamp 2005 xterra
How do I replace a head lamp on a Vauxhall Corsa Breeze Hi-TORQ
how do you replace low beam head lamp on a 91 land Crusier
how do i remove and replace my fog lamp bulbs on my 2006 bmw 525i
pot head pot head
Replace the defective bulb.
Lower the tailgate. Remove the two screws on the inside to the side of the lamp assembly with an torx wrench. The tail lamp assembly will pop out. Remove the four screws on the backside of the tail lamp with a Phillips head screwdriver. You now have access to the bulbs.
you take out the broken bulb and put in the good one YES BUT HOW DO YOU REPLACE IT???
remove and drill small hole in bottom of head lamp assembly. Very tough to get completely dry and also very tuff to find leak and reseal, best advice to replace with new or good used head lamp
The headlamps are an assembly, and the lenses/covers can not be removed.
Get a flat head screwdriver and pop it off...then replace the bulb
It means that one of the head/tail lights is not working.