0
Open the hood and remove the two candy cane shaped pins. The headlight assembly will now be able to be removed. Quarter turn the bulbs and they come right out.
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
Which beam are the high beam light on a 2000 Pontiac firebird?
the inside bulbs are the high beams.
Is a 2000 Chrysler lhs headlights interchangeable with a 2000 Concorde?
NO. the 99, 00, and 01 lhs have 3 bulbs in the headlight, a blinker, high beam and low beam. The Concorde 02,03, & 04 will interchange/work. The 2000 Concorde has only 2 bulbs (high and low beam)...
Why does low beam not work but high beam does work on my 2000 Chrysler 300 m?
Bulbs, fuse, wires ,switch.
What bulbs fit on the clk 2000?
h7 for low beam h1 for fog lights
Why does Low beam not work but high beam works?
Replace your dimmer switch and this should fix your problem Or both bulbs could be bad
Why dont the low-beam headlights work on a 1997 Dodge Intrepid but the high-beams do work?
there are two diff types of bulbs. High beam and low beam bulbs. If your low beam doesn't work then you need to replace those lights because they are probably blown.
Why does 240sx high beams work on both headlights but not low beams?
the bulbs in your car have two filaments, high beam and low beam. as you generally use mainly low beam the filament wears out a lot quicker than high beam. so replace your bulbs, as it couldn't be anything else.
Do you have to drop the transmission cross support beam on a 2000 three quarter ton Silverado to change the transmission filter?
Yes
Are the high beam bulbs the same as the low beam bulbs on a 2002 passat?
yes both are same
Why my car low beam works but not high beam?
You need to replace the bulbs in the lights.
You changed one headlight on a 2000 Ford Windstar and installed both new bulbs now high beam does not work what is wrong?
check the switch or replace the one on the steering column that switches between high and low beams
What can cause only one high beam to light on 2000 Chevy Tracker when the fuses are OK and there are no broken wires and the bulb is good?
How do you know the bulbs are good?, looks can be deceiving. i just had the same problem ... the high beams worked but the low beam was burnt out.. just replace the bulb and it works fine..
