you must remove the glove compartment, about 6 screws, then remove the lower footwell cover, three plastic push pins. the resistor is right behind the motor, it is a pain to get out. you can see one screw right in plain view, the other two are in between the rubber mat of the firewall and the resistor itself, a pain in the behind
how to take a evaorator out of a 1997 pontiac trans am
It should be located on the evaporator case.
Buy a new one and you will see what it looks like and it is mounted on the evaporator case.
Replace fan resistor located in airconditioner evaporator box in behind glove box
Hey George==The switch probably is ok Check out the resistor pack on the evaporator case. GoodluckJoe
How do you replace evaporator on a 1992 ford explorer?"
You need a blower resistor. $50 part. About $140 to have the dealer replace.
The resistor is bolted into the evaporator case near the blower motor. It is accessed under the passenger side dashboard. The trim/carpet along the transmission needs to be removed. You can then unplug the connector and remove/replace the resistor.
There is a resistor pack operated by the fan switch. It has failed. You need to replace it.
Under the hood on the passengers side located in the a/c evaporator housing next to the blower motor and held in place by two screws...............
In order to change the evaporator in Pt Cruiser, the entire dash has to be removed, then replace the evaporator, and reinstall the complete dash.
If the resistor is alright why replace it.