Four or six? For both engines you have to take the plastic engine cover off. The 4 should be fairly easy. Remove the plug ignitors and remove the plugs. Engine cold. For the six,you have to remove the air inlet plenum/throttle body assembly to get to the back plugs ,although I have seen several entries on the Toyota Nation Camry forum where members say they have removed the rear plugs without taking the plenum off.New plugs need to be torqued. Use a very small amount of anti-seize on each plug.
how to replace spark plugs on 2006 camry LE
To change spark plugs on a 1994 Toyota Camry, remove the black shafts. The spark plugs are down the four holes. Use a socket set with extension to reach the spark plugs. Replace old spark plugs with new ones.
How do you change spark plugs in a 6 cly Toyota Camry?
May have to remove the head for access or to drill them out
Disconnect the battery, remove the spark plug cables and boots, and remove the old spark plugs. Next, put in the new spark plugs, replace the cables and boots, and reconnect the battery.
Spark plugs + 30 minutes of labor.
If you do not have any problems with plugs, change them when you replace the timing belt (do not forget to replace the spark plug wires too).
I suspect you have V6. If it is the case, you will have to remove intake manifold. There is no other way to replace it.
A 1996 Toyota Camry that will have spark and then sometimes no spark might be having a problem with the spark plugs. Each individual spark plug is now a solid state electrode in that year of Toyota Camry. The ignition coil pack on top of the spark plug is probably loose or cracked.
100-120K miles.
1342
Every 100K or when necessary.