You have to move the passenger seat all the way forward... pull back the carpet to expose the plug in and where the wire comes up through the floor board. Its hard to get to the plug in but reach back in there and press the plugin part and remove the plug. Take a flat screwdriver and pop the rubber plug out of the hole in the floorboard... Remove the sensor from the exhaust pipe with a sensor socket (You can get this from the auto parts place...usually free) and screw in the new one and run the wire thru the floorboard and plug it in. It is not easy and takes some patience, but it can be done.
how to replace the water pump on a 1998 Honda Accord
Is it the back one or is it the front one...?
Where is the transmission fluid temperature sensor on a 1998 Honda accord and how do you replace it?"
The 1993 oxygen sensor is the best sensor for a 1993 Honda Accord EX.
The bank 1 sensor 1 oxygen sensor on a 2002 Honda Accord is located on the header. It is right next to the sensor circuit.
THE O2 SENSOR IS LOCATED ON THE MANIFOLD. IT JUST UNSCREWS OFF THE SIDE OF IT, THEN YOU JUST UNPLUG IT.
It is the oxygen sensor.
To replace the oxygen sensor on a Honda Odyssey, first unscrew the sensor. Then use a 22 mm socket or 7/8 inch wrench to replace the oxygen sensor.
Answer There are two o2 sensors, one on the intake manifold and the other on the catalytic converter.where is the oxygen sensor located on 99 Honda accord
The oxygen sensor on a 2004 Honda Accord is found on the exhaust system. They are placed close to the catalytic converter so the sensors can properly read the exhaust flow.
You cannot repair an O2 sensor. Replace it.
IT IS LOCATED ON THE MANIFOLD. JOSE