Want this question answered?
Un hook the electric conector on top of switch and screew it out with a wrench. EASY JOB
On a Dodge truck, the vacuum switch is on the transfer case.On a Dodge truck, the vacuum switch is on the transfer case.
The vacuum switch is on the top of the transfer case. The 4wd indicator switch is on the front axle shift actuator.
Either the transfer case is still in part time or there is a failure in the switch on the transfer case.Either the transfer case is still in part time or there is a failure in the switch on the transfer case.
The vacume switch is located on top of the transfer case left side. Just pull the rubber plug on top and unscrew with a crescent or wrench and replace. Buy a pressure kit first and check to make sure the vacume is going into the switch and not comming out. Kit cost about 25 dollars. buy
on top of the transfer case. You should see 4 vacuum lines going to the top of the switch
a transfer case So Far I have The new transmission and the transfer case.
Check the transfer case switch on top of the case the one with the vacuum lines remove and check the roller ball if it dosent roll good replace switch cheapist thing to start with beside modules or a case
How to remove a transfer case in a 97 f-250
about $1000
If equipped, it is on the top of the transfer case and has four vacuum lines plugged into it.
on the top of the transmission its on the transfer case with 3 vacuum lines coming out of it.