Disconnect the battery. Unplug the alternator and take the belts off. Unbolt the alternator, and bolt the new one in. Put the belts back on it. Plug it back in and reconnect the battery. Voila! You changed your own alternator!
It is pretty straight forward. 1) Diconnect battery 2)Loosen bolts at top and bottom of alternetor, remove belt. 3)remove plug in terminal, and wire attached with nut on back of alt. 4)Remove top and bottom bolts, remove Alt. 5)Install new Alt. Install top and bottom bolts. 6)Install plug in terminal, and wire attached with nut on back of alt. 7)place belt back over pully, set belt tension by prying gently with a long screw driver so as belt only deflects about 1/4 inch when hand pressure is applied. Hold this setting and tighten top and bottom bolts. 8)Reconnect battery.
The fuel pump is located in the top of the tank so you'll want to drain the tank first if possible. There is an access hole in the top of the fuel tank that you'll need to access through the trunk. I think you'll need to replace at least one gasket or o-ring between the cover and tank and another around the flange on the pump. The fuel sender is also part of that whole asembly.
It's gotta come out from underneath the car.
From under the car.
It is built into the alternator. I would just replace the alternator.
How do you replace the timing belt on a 1994 Geo Prizm 1.6?
i had 1991 geo prizm but i want to know what color memory wire??
See the related question: How do I replace the water pump on a 1993 Geo Prizm 1.8L?
1995 geo trunk lid bulb
how do you replace 1997 alternator belt
well i have a geo metro and i have a 3 cil in mine but they put a 4 cil in the 90s The Geo Metro is made by Suzuki. The Geo Prizm is made by Toyota and is built in California on the Corolla chassis. The 1992 Geo Prizm has a Toyota 1.6 Liter 4 cylinder. Base engine is 102 H.P. GSi engine is the same 1.6 but with 130 H.P.
You may find some help by searching for this question.How do i replace the water pump on a 1993 Geo Prizm 1.8L?
Remove the old mount & replace with the new.
If you are referring to the water inlet hose on the back of the water pump you can use this question as reference. How do i replace the water pump on a 1993 Geo Prizm 1.8L?
You don't fix it, you replace it.