The crank sensor is down by the Air conditioning compressor, remove the electrical connection and remove, can be a real pain. The cam sensor is behind the Power Steering clear thing so you remove I think 4 bolts and the sensor is behind there. Remove the electrical connection and remove the sensor.
check the batery if that's not the problem replace the cam and crank sensors. they are not that much and you can get them at the locale part store.
All O2 sensors are threaded into the exhaust system at various points.
trying to replace crank position sensor but i have no ideal where to look it is 1993 infinity G20 could you help me find this sensor
To replace the window crank handle on the 1993 Geo Prism, first remove the interior door panel. Then, access the screw that holds the window crank in place and remove it. You can then remove the handle itself.
You have to drop the fuel tank, replace the pump then re-install.
How is the wire of o2 sensors in a honda del sol 1993?
The rpm is acquired on almost all computer controlled vehicles from the crank sensor. drl
replace it. there is no repair
there is no crankshaft in an rx-7, it has a rotary engine C12 - actually there is, its called a crank angle sensor but it is located on the block and measures the eccentril shaft (which is the equivilant to a crankshaft). if you look at the biggest metal pulley at the bottom of the engine the crank angle sensors are on the side of the strange looking metal plate on this pully, two short stuby looking things.
on the front of the motor under the front crank it has a plug going to the crank.
trying to locate crank shaft sencor for 1993 Chevy lumna trying to locate crank shaft sencor for 1993 Chevy lumna
It is behind the crank pully!