2003 Audi A4 center high mount stop (third 3rd brake light) bulb replacement: Purchase the correct replacement center high mount stop (third 3rd brake light) bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the center high mount stop (third 3rd brake light) bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. If there are multiple bulbs, you may want to consider replacing all at the same time in order to keep brightness and color equal (optional).
To replace your brake light, you need to unscrew the brake cover from the inside of the trunk. Then you will be able to pull the old bulb out and replace it.
From inside the trunk.
Begin by removing the wiring harness from your third brake light. Remove the third brake light retaining screws. Reverse the process to install your new third brake light.
y
replace sensor when pad repacement is done
take screws out of lense and pull bulb out.
video on how to replace parking brake cable in ford escape 2003
There is a campaign on the brake bulbs for 2000-2003......If it hasn't been done you should get it done. The bulbs and sockets will be replaced.
they are two different lights. replace the light that is malfunctioning, but check the fuses first. It's the cheapest way out.
push it forward the it should come off
brake light and battery light is on
locate the fuse box under dash and look for brake lights replace with the right amp fuse. the fuse you pull out will have a number on it that is the apms fuse you will need to replace