mark where the rotor and the cap are pointing , remove and reinstall and make certain their EXACTLY where they were when you took the distributor out.. Also, while its out DON'T TURN THE ENGINE or you'll have to set the distibutor using the marks in a manual everyone should have a manual for their vehicle, and the library should have a professional shop manual available in the reference section for FREE to make copies of...read up and fix like a pro!! :) Dave
How much is it to replace thehead gasket on a honda accord 1998?
How much does it cost parts and labor to replace a valve cover gasket on a 1990 Honda Accord 4door.
the 2004 Honda accord has a distributor, yes.
usually the valve cover gasket and the oil seals on the top of the cover,replace gasket and the also the distributor seal
Inside the distributor. Replace distributor with OEM Genuine Honda Parts only.
Replace your distributor cap, it probably has a crack in it.
You take it to a mechanic. If your asking, you shouldnt be attempting it.
Inside the distributor. Usually you have to replace the whole distributor.
The gasket is between the head and the manifold and simply remove the bolts and replace the gasket after cleaning it real good.
the distributor does not work, you can either try cleaning it or replace it.
50 to 100 for labor, 100 to 200 for the part, if that is it
Yes, replace the head bolts.
How do you replace a radiator on a 1991 Honda Accord
how do you replace the radiator on a 2003 V6 Honda Accord
Yes, they should be interchangeable.
just remove the 3 bolts on top of the valve cover and lift it out,and theres the gasket.
whats the wiring diagram for a 2000 honda accord ex with a v6 3.0
There was not a 1999 Honda Accord LXi made. Do you have a 1989 Honda Accord LXi?
Somewhere around 500$ if done at a garage.
how to install and replace a rack and pinion on Honda accord 1994 lx
In the distributor.
Replacing a head gasket on a 1996 Honda Accord requires removal of the cylinder head, timing belt, and several other components. The head will need to be resurfaced. Remove the old gasket and place the new one with gasket sealer. Reinstalled the head.
Check for humidity in the distributor cap. Most Hondas had a gasket that was at the base of the distributor and they can dry and crack with age, or not be replaced during a routine tune-up.
No, do you not need a gasket, don't be ignant.