0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you replace the power window engine for Nissan 300zx 1990?
its easiest to bring it in because you have to take the door pannel off. (without breaking anything.) its a real pain sometimes.
Why would the power door locks on a 1990 Nissan 300ZX not lock anymore?
In my sons 1993 300zx there is an electric accuator located behind the door handle, his was broken, need to remove door panel to acsess. In my 300zx, there are 2 cheap plastic black pieces connecting a set of 2 metal rods (one going to the back of the door and one going into the door handle/power) You have to disassemble the door to get to it, try replacing that if it's broken or not even there.
What size are speakers in the 1990 Nissan 300zx?
1984-1989 2 Door 6.5 F. Door 6.5 R. Side 1990-1996 2 Door 6.5 F. Door 5.25 R. Side (with Bose system 3.89 inches [odd size]) Ref - http://forums.nicoclub.com/zerothread/12043
How do you replace outside door handle on 1990 Geo Metro?
Check this answer Door_handle_on_1994_geo_metro_will_open_from_inside_of_car_but_not_outside
How to replace a 1997 geo prizm lock?
If you mean the door lock cylinder...remove the interior door panel. On the back of the door handle there are 2 10mm hex bolts. To the outer edge of the door there is an access hole. With an extension, remove the 10mm bolt that holds the lock cylinder and door handle together. Reach in and push the nylon retainer that holds the rod into the cylinder (yellow on driver side, white on passenger side) and remove it. A slight twist of the cylinder will remove it from the door handle. Replace in reverse order.
Replacing a lock cylinder for a 94 Ford Thunderbird?
You can replace the locking cylinder, on your 1994 Ford Thunderbird, by removing the inside door panel. The locking mechanism will be visible with the door panel removed.
How do you change door cylinder?
If it's a Euro Cylinder just unscrew the screw holding it in place, turn the key slightly until you can pull the cylinder out. Put the new cylinder in and replace the screw to hold it in place.
Can the driver's door from a 1989 Dodge Caravan be used to replace the driver's door on a 1993 Dodge Caravan?
no only up to a 1990 model
Remove rear interior panels in a 1990 Nissan 300zx 2 plus 2?
The 1990 Nissan interior panels are held in place with eight retaining clips. Pry outward on each retaining clip to remove the interior door panels.
How do you open the driver side door panel to replace the window motor assembly for a 1990 300 zx?
I had to replace the window motor on my 1996 300zx. I guanantee you that it is best to have it done. Even the guys at Specialty Z had to be very careful not to let the gears slip or it is incredibly difficult to get them back in place as you only have a small hole in the door panel to work through. My opinion, don't try it yourself. Find someone who only works on Z cars and take it to them.
Would a driver's-side window from an 85 300ZX turbo fit into an 84 300ZX 2 2?
no, the 2+2 has a longer door.
How do you remove the door panel in a 93 300ZX?
Visit this site: http://carstereohelp.com/stereoremovalNis300zxFSpk.htm Scroll down to the 300ZX section. You should be good to go.
