0
How do you replace the driver door hinges on a 1991 Ford Explorer There is one hex head bolt and two that have flat heads that almost look like rivets?
Wiki User
∙ 17y ago
the one that looks like a rivet is actually a stud that is going to the inside of the truck you have to remove your kick panel inside the truck to get to it on the passenger side you might have to un bolt the computer bracket to access the bolts
Wiki User
∙ 17y ago
Add your answer:
Earn +20 pts
How do you fix a sagging driver door on a 1994 Mazda Navajo?
Replace hinges.
Can you replace top door hinge with bottom hinge on 1992 ford explorer?
You can replace the top door hinge with bottom hinges on the 1992 as long as the hinge is for the cab doors. The hinges for the tailgate would not work on the doors.
How do you change door hinge pins on a 02 VW Jetta?
You don't. You have to replace the entire assembly. I had the same issue on the driver's side front door. Hinges were wore and sagging. Had to replace both hinges and don't forget to replace the stretch bolts as well.
How do you align a driver door on a 1996 Ford Taurus Its about an inch low when you shut it?
Check and possibly replace door hinges
How do you adjust a sagging driver's side door on a 98 Silverado?
Adjust or replace hinges Sorry, there is no adjusting these style hinges, they are welded in place, you can usually make them better by replacing the pins and bushings in the hinges but if the hinge itself is wore that bad where bushings wont fix it you're looking at having a body shop weld new hinges in...
How do you remove the door on a 1998 ford explorer?
disconnect wiring harness, mark hinges, remove bolts securing hinges to body.
How do you adjust the lift gate hinges on a 1999 Ford Explorer Limited?
With a fleshlight
How do you replace lower door hings on Lincoln town car?
To replace the lower door hinges on a Lincoln Town Car, new door hinges have to be purchased. This can usually be found at a salvage yard for automobiles. The old hinges have to be cut off with a torch and the new hinges welded on.
How do you replace the hood on a 1986 Buick Century if the hinges are bent?
Just replace the bent hinges along with the new hood. Salvage yard is a good source for these parts.
How do you replace the driver side door of a Chevy S10 blazer?
You didn't say what year you have but, later models require removing the door panel, disconnecting the wire harness, removing the detent spring and drive out the two hinge pins. The spring will need a special tool to replace. You don't want to replace the hinges unless you have no choice. The original hinges are welded in to the door and the cab. They can be replaced but it is a expensive job. In most cases you can replace the hinge pins and bushings to restore the hinges back to normal. The pins and bushings are available at your local auto parts store.
How can you adjust the driver's side door of a 1989 Ford Thunderbird so it will close right?
CHECK THE HINGES. IF THEY ARE BENT YOU MAY NEED TO REPLACE THEM. THIS IS WHAT I HAD TO DO WITH MY T-BIRD AND THE DOOR SHUT BEAUTIFUL. GOOD LUCK!
How do you replace 2002 e350 side door hinges?
u dont
