0
How do you replace the freeze plug under the motor mount of a 305 motor?
Wiki User
∙ 10y ago
remove motor mount. jack up engine by the harmonic balancer...be careful. install blocks of wood in between frame and engine. then remove and replace freeze plug
dry.
Installing the new plug is much easier if you get one of those rubber ones at the auto parts store. They'll know what you need.
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
On a 1991 f250 460 motor is there a freeze plug directly under the driverside motor mount?
Yes, it can be seen looking from the slave cyl/bell housing area
How do you replace motor mounts 1976 corvette?
Put a jack under the engine for stability. Unbolt one motor mount, and jack the engine up slightly. The mount should be able to be removed, replace it and repeat for the other side.
How do you replace the power steering on a 99 cougar V6?
pull the intake , and then pull the motormount and its under the motor mount
Are the freeze plugs behind the motor mount on a 1992 dodge 5.2 L?
Yes, there are plugs under both mounts, along with the back of the engine(trans has to be removed for these).
Do need to remove the motor mount to replace belt on a 2000 Malibu?
yes you do. jack up under engine, put a block on jack so not to hurt engine, only put enough tension to re move left motor mount .then replace belt,put mount back on, lower jack, then check mount bolts fo tightness. 3.1 Chevy engine in 2000 Malibu!!
How do you replace the front motor torque mount on a 1995 Saturn SC?
Purchase your replacement part. Put a jack under the engine with a board to support the engine. Put slight pressure on the engine but no more. Remove the mount and replace. Lower jack.
Where is Toyota Camry motor mount?
under the hood
What about driving with one broke motor mount?
Most motor mounts are designed to still hold the engine in place with the rubber portion of the mount ripped in half. But you will probably hear some noises coming from under the hood and feel strange vibrations. It would be best to replace the bad mount soon.
How do I replace 1989 Toyota Celica st motor mounts?
This all depends on which mount(s) you are wanting to replace. If it is the timing belt side mount. You will need to use a 17mm socket to remove the bolt in the mount. The mount has 2 studs with 14mm nuts on then that also need to be removed from under. If you are referring to the front/rear mounts, you will need to remove the bolt with a 17mm socket. Under the mount is a plastic cap that covers 2 more bolts (2 for each mount). These can be removed with either a 12 or 14mm socket. And since you said motor mounts i will not explain the transmission mount..but it is similar.
Where is oxygen sensor on Geo Metro?
under he motor mount
How do you replace motor mount in infiniti g20 1993?
For the upper motor mount replacement-Passenger Side-support engine with a jack,careful where you put the jack head so as not to bend and damage anything,don't put it under the oil pan!.Take out the bolts in the motor mount that go into the engine block,Lower engine just an inch or so with the jack,then take out the one bolt in the middle of the motor mount where the rubber is.Put in new motor mount and reverse these instructions to install. You may have to wiggle things around with the jack and your hands to get the bolts to start threading and line up when you are going back in with the new motor mount.
How do you replace motor mounts on 98 ford escort?
There is 1 mount on the front of the engine and 2 mounts on the transmission. Put a large block of wood under the oil pan of the engine and jack it up to take the weight off the mounts. Remove the bolt and fasteners on the engine mount. Replace it first. Then replace the 2 mounts on the transmission. The front mount is accessable but the rear mount you have to take the cross member off to get to it.
