1. Jack up vehicle and remove tire. 2. use Torx bit to remove (2) caliper mounting pins ( bolts ). 3 ply caliper off of rotor. 4. pop out brake pads. 5. use large C-clamp to force caliper piston back into caliper piston well. 6. use even larger C-clamp to force mounting bolt ( rubber mounted ) guides flush with caliper mounting bosses ( if extended, caliper won't mount ). 7. pull rotor off & replace with reground or new unit. 8. reinstall pads 9. position caliper on rotor 10. seat & tighten caliper pin-screws ( tork to specs ). 11. install wheel-tire assy. 12. lower vehicle. 13. re-tork wheel studs.
Replace axle on 2001 buick Lesabre
AnswerFront or rear?front
The way that replace a window regulator in a 2003 Buick LeSabre front drive side is by removing the door panel. Next, disconnect the electrical connector on the regulator and replace.
33 Ft lbs
Your hands, your hands
Whats the procedure for replacing a 2002 Buick Lesabre front strut.?
I have a shimmy or small vibration while driving the interstate on my 1994 buick lesabre - if i was to check the front and rear bearings - how would i do that and what would i look for
I want to try and remove and replace my front struts on my 1995 buick lesabre is there a chance of seeing on line pictures of how to?
118 ft lbs 1997-2004 Buick LeSabre
Front wheel drive
yes
5.25"