Remove the securing Phillips head screw on the lamp assy. to be removed. The light assy. also has a hidden securing plastic stem and rubber grommet which goes dry behind the light assy. Gently pry light assy. out. If possible spray WD-40 from the engine compt. side first to try and lubricate the rubber grommet. When lamp assy. is removed you can then replace the lamp by undoing the plug at the rear.
the turn signal flasher and the hazard flasher are located in a small canister shaped unit located in the wiring harness under the dash near the steering column. in all Isuzu trucks from 81'-93'
How I can replace ignition switch cylinder from Isuzu Rodeo?.
There are 4 screws located under the rubber on the edges of the headlight. These have to be removed in order to get the headlight out.
Replace Replace
Open the drivers door, look on the edge of the dash. FYI: The signal and emergency flashers are above the cigarette lighter
how do I remove the water pump from my 1990 Isuzu truck?
How do you replace the tailgate lock on a isuzu wizard 1999
seems to be in the same place for 2x2 or 4x4, drivers side under dash mounted above kick panel
where is the pcv valve located on a 1995 Isuzu rodeo v6 3.2l
blown bulb...doh !
How do you put on a serpentine belt on a 2002 Isuzu axiom
open the hood unplug the bulb from the back of the light assembly and un do the metal clip, pull bulb out of replace with a new one and reinstall